• Construction: 16AWG sheet steel

• Dimensions: 14.5”W x 18.9”H x 4.25” D

• Weight (without batteries): 20lb

• Mains voltage supply: 115 or 230V AC 50 or 60 Hz.(specify when ordering, default is 115V)

• Mains supply fuse: 1.6A 250V

• Maintenance-Free sealed batteries

• Aux 24V supply: Fused at 500 milliamps

• Battery (24 hour standby): 9Ah 12V (2 per panel) (non-networked)

• Fault contact rating: 30V DC 1 Amp

• Fire contact rating: 30V DC 1 Amp

• Alarm contact rating: 30V DC 1 Amp

• NAC output rating: 3.1V across both channels, 2.3V across any one

• Detection loop: 250 milliamp output

• Serial expansion port: Serial RS485

• PC port: Serial RS232

• Network connection: Optional network Cards allow the use of e-Net networking or VESnet networking

• NAC Synchronization: Internal Support

• NAC Protocols: System Sensor, Wheelock, Gentex, Amseco

• Primary AC: 120VAC @ 2 Amps 60hz (Optional 240 VAC 50hz)

• Output DC: 24VDC @ 4 Amps

• Power Supply: 5.25 Amp regulated and integrated

• Charger Current: 1.25 Amps max.

• Dimensions: 14.5” W x 24”H x 5” D

• Weight: 25 lbs. (without batteries)

• Color: Red (optional gray)

• Display: 8-line x 40-character LCD (320 characters’ total)

• Zones: 500 Zones per network

• SLC loops: 2 or 4 (class A or B)

• Devices per loop: 126 sensors & modules (800 addresses + sub-addresses max. per panel)

• NAC Outputs: (4) 1.6 Amp @ 24VDC (class B)

• Relay Outputs: (5) Form C 1 Amp @ 30VDC

• Voltage Outputs: (3) 500mA @ 24VDC, reverse polarity supervised

• Power: 500mA @ 24VDC

• Inputs: (3) digital pull downs

• Operating Voltage: 17-41 VDC

• Standby Current: 350μA

• Alarm Current: 500μA

• Transmission Method: DCP—Digital Communication Protocol

• Maximum Humidity: 95% RH Non-Condensing

• UL Temperature Range: 135º F to 190º F

• Operating Temperature Range: 32º F to 190º F

• Rate of Rise: 15º F/ Min

• Color & Case Material: Bone/ White – ABS Blend

• Weight: 3.2 oz, (4.9 oz with 4” base)

• Operating Voltage: 17-41 VDC

• Standby Current: 450μA

• Alarm Current: 540μA

• Transmission Method: DCP—Digital Communication Protocol

• Maximum Humidity: 95% RH Non-Condensing

• UL Temperature Range: 32º F to 115º F

• Operating Temperature Range: 14º F to 122º F

• Sensitivity Range:7 – 4.0%/ FT @ 300 FPM, 7 – 3.86%/ FT @ 2000 FPM, 7 – 2.65%/ FT @ 4000 FPM

• Air Velocity Range: 0-4000 fpm

• Color & Case Material: Bone/ White – ABS Blend

• Weight: 3.4 oz, (5.1 oz with 4” base)

• The Dealer shall furnish and install where indicated on the plans, models AS2011 Photoelectric Smoke Sensor, AS2010 Heat Sensor and AS2012 Multi-Criteria Sensors.The selected sensor shall be attached to the AS7001 and permit direct interchange between the listed sensors.The vandal-resistant, security locking feature shall be used in those areas as indicated on the drawing. The locking feature shall be optional and can be implemented when required.

• Note: SLC maximum resistance is 50 ohms.